제조 공정 of flat welding flange is described as follows:

제조 공정 of flat welding flange is described as follows:

The manufacturing process of flat welding flanges. The production process is divided into pure forging, flat welding and butt welding flange artificial wool forging (the next step), flat welding flange steel plate, centrifugal casting and casting flange. The manufacturing process of flat-welded flanges is mainly introduced above. Flat-welded flanges are easier to align in the welding assembly of flat-welded flanges, and they are also inexpensive and have been widely used.

그만큼 플랫 용접 플랜지 is 연결 with 파이프라인 by 삽입 the pipeline into the 플랜지 구멍 to the 적절한 위치. 플랫 용접 플랜지 또한 호출 플랫 플레이트, 또는 랩 용접 플랜지. 플랫 용접 플랜지 is 연결 to the 파이프라인, and the pipeline is inserted into the 플랜지 구멍 to a 적합 위치, and then lap welding is performed. The flat welding flange is suitable for low pressure, low 압력 변동 % 2C 진동 및 진동 배관 시스템.

그만큼 clamp section is convex, and root grooves are added on both sides of the clamp, and sealant is injected to compress the root of the clamp. the width of the clamp covers the outer circumference of the necked flange, and the circumferential length of the clamp should cover at least a small sector (the space between the two bolts) on both sides of the leakage point. The clamp is fixed on the bolt with a ring on the neck flange bolt, and each small fan shall not be less than one spray hole. Inject the sealant according to the "intermediate operation method" to eliminate leakage.

따라서 , the leak repair of the necked flange must be orderly and appropriate, and it is necessary to use third-party tools, such as local fixtures.

그만큼 이유 for 채택 this method is that after eliminating the leakage point of the flange, it is easy to deal with the leakage of other parts. Fixing fixtures should be installed, and baffles should be added on both sides of the leakage point to prevent the injected sealant from leaking from the local sealed chamber. The baffle is fixed with bolts and inserted into the bolts. The upper part of the baffle is inserted into the groove of the fixture and pressed with bolts. the lower part reaches the flange protrusion and gasket. The width is equal to the flange gap. After adjustmenting the gap, inject the sealant according to the "intermediate operation" to eliminate leakage.

www.superbheater.com